Livatro 3 L Warm Mist Humidifier – White
Livatro 3 L Warm Mist Humidifier – White
A warm mist humidifier for everyday use in rooms at home, with a removable water tank that makes routine refilling and cleaning easier.
- Delivery within Australia. Shipping calculated at checkout.
- 30-day returns. View eligibility & return details.
- Secure checkout.
Features
- Heating produces warm mist for room humidification; Fast, Standard and Sleep settings let you choose the operating mode.
- The removable tank provides access for refilling and cleaning, while the removable top cover can be washed separately.
- A shutdown timer lets you choose the humidifying period without leaving the unit running indefinitely. It is separate from Auto-Clean.
- Display-light control and screen lock let you manage illumination and prevent unintended control changes.
- Heating stops when water runs out or the lid is opened. The lid must be closed and locked before heating resumes; tip-over protection also cuts power when the unit tilts.
Specifications
- Model
- LVHD3001W
- Tank capacity
- 3 L (0.79 US gal)
- Water tank
- Removable 304 stainless steel
- Rated voltage and frequency
- 220–240 V, 50–60 Hz
- Rated power
- 500 W
- Colour
- White
Care & Use
- Fill with clean tap water below the MAX mark. Do not add essential oils or other substances during normal humidification.
- Wipe the tank exterior and the contact surface with the heating base dry before replacing the tank; secure the lid and keep the steam outlet clear.
- Turn off, unplug and allow the unit to cool fully before refilling, moving or cleaning. Never open the lid or touch the inner tank while it is operating.
- Clean the tank and lid at least weekly. For limescale in the stainless-steel tank, use citric acid or white vinegar as directed and rinse thoroughly. Do not use strong acids, steel wool or abrasive tools.
- Wash the removable top cover with water. Keep the silicone ring attached and rinse or wipe it in place.
- Wipe the heating base and inner wall with a dry or lightly damp cloth. Do not rinse the base, use a dripping cloth or immerse the main body. Avoid solvents, polishing powder and detergents.
- Replace standing water promptly. Clean and dry all parts before extended storage.
Shipping & Returns
Pairs well with
Product Q&A
Why does mist not appear immediately after switching on?
Water needs to heat to boiling before producing steam. The manual advises allowing 30–40 minutes after startup; check the water level and power connection before treating a delay as a fault.
What should I do when the orange low-water light comes on?
Heating stops when the tank is empty. Switch off, unplug and let the unit cool before refilling below MAX. The manual says to wait one minute after refilling, then press Power to restart.
Can I use the shutdown timer with Auto-Clean?
No. The timer increases in 30-minute steps up to 12 hours in humidifying modes; it is unavailable in Auto-Clean mode.
Why will screen lock not activate while the light is off?
The manual requires the display light to be on before screen lock can be enabled. Press the light button briefly to turn the display light on, then hold it for two seconds to lock or unlock the screen.
Which parts can I rinse with water?
After switching off, unplugging and cooling fully, you may wash the removable top cover and clean the stainless-steel tank as directed. Leave the silicone ring attached. Only wipe the heating base and main body with a dry or lightly damp cloth; do not rinse or immerse them.
How do I remove white limescale from the tank?
After cooling and unplugging, use citric acid or white vinegar as directed for the stainless-steel tank, then rinse thoroughly. Do not use strong acids, steel wool or abrasive tools, and keep cleaning liquid out of the powered base.
Local Shipping
Ships from Australia.
Customer Support
Orders, products & warranty.
30-Day Returns
View eligibility & return details.
Secure Checkout
Your data stays yours.
